0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|V=2|P|X| CC |M| PT | sequence number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| synchronization source (SSRC) identifier |
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
| contributing source (CSRC) identifiers |
| .... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first twelve octets are present in every RTP packet, while the
list of CSRC identifiers is present only when inserted by a mixer.
The fields have the following meaning:
version (V): 2 bits
This field identifies the version of RTP. The version defined by
this specification is two (2). (The value 1 is used by the first
draft version of RTP and the value 0 is used by the protocol
initially implemented in the "vat" audio tool.)
padding (P): 1 bit
If the padding bit is set, the packet contains one or more
additional padding octets at the end which are not part of the
Schulzrinne, et al Standards Track [Page 10]
RFC 1889 RTP January 1996
payload. The last octet of the padding contains a count of how
many padding octets should be ignored. Padding may be needed by
some encryption algorithms with fixed block sizes or for
carrying several RTP packets in a lower-layer protocol data
unit.
extension (X): 1 bit
If the extension bit is set, the fixed header is followed by
exactly one header extension, with a format defined in Section
5.3.1.
CSRC count (CC): 4 bits
The CSRC count contains the number of CSRC identifiers that
follow the fixed header.
