rtsp协议相关之-rfc1889(RTP 实时应用传送协议文档).txt[38]

[入库:2006年2月23日] [更新:2007年3月24日]

本文简介:

   This item is used to define experimental or application-specific SDES
   extensions. The item contains a prefix consisting of a length-string
   pair, followed by the value string filling the remainder of the item
   and carrying the desired information. The prefix length field is 8
   bits long. The prefix string is a name chosen by the person defining
   the PRIV item to be unique with respect to other PRIV items this
   application might receive. The application creator might choose to
   use the application name plus an additional subtype identification if
   needed.  Alternatively, it is recommended that others choose a name
   based on the entity they represent, then coordinate the use of the
   name within that entity.

   Note that the prefix consumes some space within the item's total
   length of 255 octets, so the prefix should be kept as short as
   possible. This facility and the constrained RTCP bandwidth should not
   be overloaded; it is not intended to satisfy all the control
   communication requirements of all applications.

   SDES PRIV prefixes will not be registered by IANA. If some form of
   the PRIV item proves to be of general utility, it should instead be
   assigned a regular SDES item type registered with IANA so that no
   prefix is required. This simplifies use and increases transmission
   efficiency.

Schulzrinne, et al          Standards Track                    [Page 36]

RFC 1889                          RTP                       January 1996


6.5 BYE: Goodbye RTCP packet

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |V=2|P|    SC   |   PT=BYE=203  |             length            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                           SSRC/CSRC                           |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   :                              ...                              :
   +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
   |     length    |               reason for leaving             ... (opt)
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   The BYE packet indicates that one or more sources are no longer
   active.

   version (V), padding (P), length:
        As described for the SR packet (see Section 6.3.1).

   packet type (PT): 8 bits
        Contains the constant 203 to identify this as an RTCP BYE
        packet.

本文关键:rtsp协议相关之-rfc1889(RTP 实时应用传送协议文档).txt
  相关方案
Google
 

本站最佳浏览方式为 分辨率 1024x768 IE 6.0(或更高版本的 IE浏览器)

go top