RTCP packet: A control packet consisting of a fixed header part
similar to that of RTP data packets, followed by structured
elements that vary depending upon the RTCP packet type. The
formats are defined in Section 6. Typically, multiple RTCP
packets are sent together as a compound RTCP packet in a single
packet of the underlying protocol; this is enabled by the length
field in the fixed header of each RTCP packet.
Port: The "abstraction that transport protocols use to distinguish
among multiple destinations within a given host computer. TCP/IP
protocols identify ports using small positive integers." [3] The
transport selectors (TSEL) used by the OSI transport layer are
equivalent to ports. RTP depends upon the lower-layer protocol
to provide some mechanism such as ports to multiplex the RTP and
RTCP packets of a session.
Schulzrinne, et al Standards Track [Page 7]
RFC 1889 RTP January 1996
Transport address: The combination of a network address and port that
identifies a transport-level endpoint, for example an IP address
and a UDP port. Packets are transmitted from a source transport
address to a destination transport address.
RTP session: The association among a set of participants
communicating with RTP. For each participant, the session is
defined by a particular pair of destination transport addresses
(one network address plus a port pair for RTP and RTCP). The
destination transport address pair may be common for all
participants, as in the case of IP multicast, or may be
different for each, as in the case of individual unicast network
addresses plus a common port pair. In a multimedia session,
each medium is carried in a separate RTP session with its own
RTCP packets. The multiple RTP sessions are distinguished by
different port number pairs and/or different multicast
addresses.
