no effect if this machine is not on a network that provides IPv6 service.
IPv4 service will not be affected if IPv6 is enabled.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Enable IPv6
qqqqqqqqqqq
[ ] Yes
[X] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示你是否采用IPv6技术?本例中,不采用IPv6技术,按F2键继续安装;
16、等待一会,出现提示:
q Set the Default Route qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
To specify the default route, you can let the software try to detect one
upon reboot, you can specify the IP address of the router, or you can choose
None. Choose None if you do not have a router on your subnet.
> To make a selection, use the arrow keys to select your choice and press
Return to mark it [X].
Default Route
qqqqqqqqqqqqqqqqqqqqqqqqqq
[X] Detect one upon reboot
[ ] Specify one
[ ] None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示你设置缺省网关,本例中,我们选择None,现在不设置缺省网关,以后在设置,使用上下
箭头,移动光标到[ ] None位置后,按空格键选中,然后按F2键继续安装;
17、出现如下提示:
q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Networked: Yes
Use DHCP: No
Primary network interface: ce0
Host name: rac1
IP address: 192.168.0.1
System part of a subnet: Yes
Netmask: 255.255.255.0
Enable IPv6: No
Default Route: None
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F4_Change F6_Help
提示你确认上面输入的信息,如果上述的输入信息有错,可以按F4键后重新输入;如果正确,
按F2键后继续安装;
18、出现提示:
q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system will use the Kerberos security mechanism.
Specify No if this system will use standard UNIX security.
Configure Kerberos Security
qqqqqqqqqqqqqqqqqqqqqqqqqqq
[ ] Yes
[X] No